DROP POINT BLADE
The 3.5” drop point blade is constructed with precision engineering and a factory sharpened fine edge to ensure clean cuts with minimal effort. The drop point blade shape is a versatile design making it ideal for everyday carry (EDC), camping, hunting, woodwork, slicing and general utility uses.
5Cr13 STEEL (Drop Point Blade)
5Cr13 stainless steel offers excellent hardness, maintains a good, sharp edge, and has great corrosion resistance at an affordable price.
BLACK OXIDE FINISH (Drop Point Blade)
The black oxide coating on the drop point blades not only looks great, but it helps improve abrasion and corrosion resistance.
SAW BLADE
The 3.25” saw blade is constructed with precision engineering and a factory sharpened crosscut edge to ensure smooth sawing cuts with minimal effort. This saw blade style is commonly used in carpentry and woodworking and is great for sawing tree branches in the outdoors
65Mn STEEL (Saw Blade)
65 Manganese (65Mn) steel properties include high hardness and excellent wear resistance to reliably perform in the field.
TITANIUM NITRIDE (TiN) COATING (Saw Blade)
The Titanium Nitride (TiN) coating provides improved abrasion-resistance, corrosion- resistance, and durability over uncoated tools.
INSTRUCTIONS
IMPORTANT: It is advised to always handle the blades by the dull, spine side to keep your fingers furthest away from the sharp edge to prevent risk of injury.
BLADE REMOVAL
1. Carefully unfold the knife and push the toggle lock thumb stud to the unlocked position. A yellow dot will be visible on the opposite side of the toggle lock.
2. Grip the knife in your hand and use your thumb to push down on the blade release located on the retention support.
3. With your opposite hand, carefully pinch the sides of the blade and slide it out. Be sure to handle the blade from the dull side so the sharp edge is oriented away from you and your hand.
4. Lift your thumb off the blade release.
BLADE INSTALL
1. Carefully unfold the knife and push the toggle lock thumb stud to the unlocked position. A yellow dot will be visible on the opposite side of the toggle lock.
2. Insert a blade by sliding it into the retention support until it clicks into place. Be sure to handle the blade from the dull side so the sharp edge is oriented away from you and your hand.
3. Push the toggle lock thumb stud to the locked position.
4. Pinch the blade by the dull side and gently pull to ensure it is secure.
CARE & MAINTENANCE
SHARPENING
Swift Edge blades come with a factory sharp edge suitable for all your cutting, slicing, sawing, and filleting needs. They are intended to be replaced after extended use, so it is important to regularly inspect and dispose of heavily worn or damaged blades. TRUE does not recommend sharpening the Swift Edge replacement blades, but minimal honing can be done to extend the life of the blade.
CLEANING
We recommend cleaning your knife and blade after every use. This is especially important with the Swift Edge knifes to ensure the retention housing is free of debris. Carefully hand wash with liquid dish soap and warm water. Do not use abrasive cleansers or scouring pads that may scratch the blade or knife finish. Dry thoroughly prior to storage to prevent the risk of rusting.
OILING
If needed, a small amount of oil can be used to lubricate the pivot mechanism of the knife. A thin coating of oil can all also be applied to the blades to prevent the risk of rusting when in storage
The information below is required for social login
Sign In
Don't have an account? Create one here.
First Things First...
You must sign in or create a NEBO account to apply to join NEBO PRO.
CREATE ACCOUNT